In that case, you must :
- Unscrew the nickel sides of the bumper under the wheels.
- Then, it must have some plastic clips for the plastic covers front hte wheels. If you break the clips, don’t worry. Use wire wraps to refit the bumper later.
- After that, unbolt the bumper from the fenders.
- Open the hood and unscrew the uper part of the bumper.
5.If you have fog lights, remove the plugs.
The difference between the two models are that, the bumper of the 1st edition was a separate part from the top “mask”. See here:
Yours is a whole part!